WATER STILL - Automatic
PEW-5

water still
Click to enlarge
Construction
Body The main body consists of a stainless steel evaporator vessel. When the lid is put over the vessel, and it seals the recess around the head of the vessel.
Condenser This incorporates a stainless steel condenser tube to condense the steam coming from the vessel, and delivers the distilled water through the outlet. A constant level attachment is provided to keep the water level constant in the vessel.
Wall Bracket The water still can rest on a bracket that is supplied with it. The bracket (made of mild steel) should be fixed on a wall.
Finish The entire body is fabricated in stainless steel.
Heating and Control
Heating Heating is carried out by immersion type electric heaters.
Control No temperature control is necessary in this instrument. However, the flow of water through the inlet should be adjusted for a constant level. This is assured by water dripping out from the constant level attachment.
Model Output Heater Rating
PEW-5a 2 liters/hour 1.5 KW
PEW-5b 4 liters/hour 3.0 KW
PEW-5c 6 liters/hour 4.5 KW
Note: Distilled water output depends on the mains voltage, and the rate of water-supply at the inlet.
   
Back to Top Products