BACTERIOLOGICAL INCUBATOR
PEW-60

Click to enlarge
Click to enlarge
Construction
Cabinet Double walled cabinet with outer made of mild steel, and inner chamber made of either mild steel or stainless steel as required.
Insulation Glass wool filled between the walls to a minimum thickness of 2 inch.
Outer door Outer door is fitted on heavy chrome plated brass hinges, and it contains a 'spring and roller ' type latch.
Inner door Inner door is made of glass and is provided with a magnetic latch.
Finish Outer side and inner sides (in case of mild steel) are painted with enamel paint.
Heating and Control
Heating Heating is carried out by a specially designed low-rating heater.
Control The temperature is controlled by a thermostat. In PEW-60C, temperature is controlled by a solid-state temperature controller. For better accuracy and safety of the incubator, Digital Temperature Controller (PEW-202) can be provided at an extra cost.
Heat Transfer Heat transfer occurs by natural air convection (except in PEW-60C) with proper inlet and outlet. In PEW-60C, heat is re-circulated with the help of a motorized blower.
Temp. Range 5OC above the ambient temperature to 60OC maximum.
Accuracy Better than 0.5OC.
Model Chamber Size Outer Size Shelves Heater Rating
PEW-60-a 14" X 14" X 14" 18" X 19" X 25" 2 115 W
PEW-60-b 18" X 18" X 18" 22" X 23" X 29" 3 250 W
PEW-60-c 24" X 24" X 36" 40" X 31" X 60" 5 1000 W
PEW-60-d 12" X 12" X 12" 17" X 17.5" X 26" 2 115 W
PEW-60-e 18" X 18" X 24" 24" X 23" X 41" 3 250 W
PEW-60-f 24" X 24" X 24" 30" X 29" X 41" 3 500 W
PEW-60-g 10" X 10" X 10" 15" X 17" X 24" 2 100 W
   
Back to Top Products